| Product / Item | Brand | Variant / Model | Unit | Price |
|---|---|---|---|---|
| Canadian Solar TOPCon bifacial 585W | Canadian Solar | 585W | panel | Rs. 24,277.5 |
| Canadian Solar TOPCon bifacial 620W | Canadian Solar | 620W | panel | Rs. 26,040 |
| JA Solar N-Type bifacial 590W | JA Solar | 590W | panel | Rs. 23,010 |
| JA Solar N-Type bifacial 625W | JA Solar | 625W | panel | Rs. 24,375 |
| Jinko N-Type bifacial 585W | Jinko | 585W | panel | Rs. 23,400 |
| Jinko Tiger Neo 3.0 bifacial 645W | Jinko | 645W | panel | Rs. 26,445 |
| LONGi Hi-MO 7 bifacial 620W | Longi | 620W | panel | Rs. 26,040 |
Solar panels in Pakistan are generally priced per watt (Rs/W), not at one fixed national price per plate. In early October 2026, a comparison of published Pakistani dealer lists recorded many current-generation panels at approximately Rs 38–45 per watt, with variation by brand, model and seller. This is dated market guidance, not a guaranteed offer on 25 October or a government tariff. Always confirm the exact manufacturer model and a written, current dealer quotation.
How to calculate the cost of one solar panel
To convert a quoted per-watt amount into a panel price, multiply the module’s rated maximum power in watts by the seller’s rupees-per-watt quotation. For example, at a hypothetical Rs 42/W, a 585 W module would cost 585 × 42 = Rs 24,570 before any separately charged delivery or tax. This arithmetic is an illustration, not a live dealer price.
| Rated panel power | Illustrative cost at Rs 42/W | Practical check |
|---|---|---|
| 550 W | Rs 23,100 | Confirm model and generation |
| 585 W | Rs 24,570 | Compare exact module datasheet |
| 610 W | Rs 25,620 | Check roof dimensions |
| 650 W | Rs 27,300 | Check electrical compatibility |
A lower per-watt figure is not automatically a better deal. An older or clearance panel may have different dimensions, manufacturing date, degradation warranty or electrical characteristics. Pricing sources also differ: a wholesale rate for a bulk order is not the same as the installed or retail price of one panel.
Which brands and panel technologies matter?
Pakistani retail lists commonly include LONGi, Jinko, JA Solar, Trina Solar and Canadian Solar, along with other manufacturers. The important comparison is the exact module series and published datasheet, not a general claim that every panel from one brand delivers the same output.
N-type TOPCon and back-contact panels
N-type TOPCon is one photovoltaic cell architecture found in contemporary solar modules. Back-contact designs are another approach: for example, LONGi describes its Hi-MO X10 family as using HPBC 2.0 technology. Do not treat “N-type,” “TOPCon” and “bifacial” as interchangeable labels: they answer different questions about cell architecture or whether the rear side can receive useful light.
Single-glass, dual-glass and bifacial
A double-glass construction describes how the module is packaged, while bifacial describes electricity generation from both faces under suitable installation and reflection conditions. A bifacial panel does not automatically produce a fixed bonus on a rooftop where the rear face is heavily shaded. Compare the datasheet, mounting arrangement and inverter limits for the actual site.
What determines the solar panel rate in Pakistan?
- Exact model and power rating: a 585 W panel and a 650 W panel are not the same product.
- Cell technology and module construction: compare current series with genuine datasheets.
- Quality and traceability: confirm manufacturer serial number, warranty and genuine dealer invoice.
- Purchase volume: cash-and-carry wholesale quotes and small retail orders can differ.
- Freight and local availability: transport and stock conditions influence delivered cost.
- Tax and quote inclusions: ask whether sales tax and handling are included; do not assume every published rate uses the same tax basis.
How many panels are needed for a 5 kW rooftop array?
Panel count is a design calculation rather than a fixed answer. Dividing a nominal 5,000 W DC target by 585 W gives approximately 8.55 panels, so nine 585 W panels provide 5,265 W (5.265 kWp) of nominal DC capacity. The inverter’s nominal AC capacity can differ from the installed DC module capacity; the designer must check the inverter’s supported DC range, voltage, current and allowable string configuration.
Actual generation is not simply the panel label multiplied by hours of daylight. Output depends on irradiance, temperature, shade, tilt, orientation, dust, cable losses and system conversion efficiency. Avoid installers who guarantee a universal daily kWh number without a site survey and assumptions.
Panel-only price versus complete solar-system cost
The module bill is only one part of a working rooftop system. A full budget may include an on-grid, hybrid or off-grid inverter; mounting structure; DC and AC wiring; isolators and protective equipment; earthing; installation labour; inspection; optional batteries; and any connection or utility charges. Batteries are a separate decision and cannot be priced from solar-panel watts alone.
| Cost component | What to verify before accepting a quote |
|---|---|
| Solar modules | Manufacturer, model, exact watts, quantity and serial traceability |
| Inverter | Grid/hybrid/off-grid type, rated capacity and warranty |
| Mounting and cables | Structure design, materials, route length and safe installation |
| Protection and labour | Isolation, surge protection where appropriate, earthing, testing |
| Battery storage, if included | Battery chemistry, usable kWh, compatible inverter and warranty |
| Grid approval, if applicable | Current distribution-company and NEPRA requirements |
Get a line-item installed quote. An attractive Rs/W panel advertisement may exclude the inverter, protection devices, rooftop structural work and labour. Compare projects on total specification, workmanship and warranty support rather than headline price alone.
Warranty, documentation and counterfeit-risk checks
Ask the seller for the exact manufacturer datasheet and warranty document matching the model code. Inspect serial numbers and any available manufacturer authentication service. An “A-grade” label by itself is not a substitute for a documented specification, traceable sourcing and inspection for cracked glass, damaged frames or inconsistent labels.
Check the installer’s structural assessment and electrical design, especially where rooftop loads or difficult cable routes are involved. Electrical equipment and grid interfaces should be installed by appropriately qualified people. Do not assume the panel warranty covers damage from poor installation or all types of performance shortfall.
Net billing and export-credit rules
A grid-connected system can have different economics from an off-grid system. Pakistan’s NEPRA legal register lists the 2026 Prosumer Regulations and subsequent amendments, so users should verify the current arrangement with their distribution company before calculating expected export credits. Do not apply an old net-metering assumption to a new application without checking the applicable rules.
To research compatible equipment in more detail, see the site’s Jinko panel guide, JA Solar panel guide and Inverex inverter prices. Note that these linked posts also require their own freshness checks before treating their displayed figures as current.
Frequently asked questions
What does price per watt mean?
It is the panel selling price divided by its rated watts. Multiply Rs/W by the module’s labelled wattage to estimate one module’s quoted cost.
Is a 585 W panel enough for a 5 kW system?
One panel is only 0.585 kWp. Nine such modules total 5.265 kWp DC; an installer must confirm compatibility and rooftop fit.
Does bifacial mean double-glass?
No. Bifacial describes rear-side light collection; glass construction describes packaging. Verify both on the exact model datasheet.
Are solar panel prices the same in Lahore and Karachi?
Not necessarily. Seller, stock, freight, quantity and included services can vary; ask for comparable dated quotes.
Do quoted panel rates include an inverter and installation?
Usually a panel-only quote does not establish inclusion of these items. Request a detailed system quotation instead of assuming they are covered.